Lenel DirecDoor, Руководство по установке

Страница: 68 / 90

Controller Firmware Tools
68
DirecDoor Installation Guide
Controller Parameters Menu > Primary Network Form
Access the Controller Parameters menu and use the Primary Network form to configure the network
address settings for the controller. A static or dynamic IP address can be used for the controller.
Note: By default, the Enable IPV6 and Enable IPV4 check boxes are selected. At least one
of these check boxes must be selected. Deselecting Enable IPV4 hides the Controller
Information section. Deselecting Enable IPV6 hides the Controller Information:
IPV6 section.
Controller Information Reports
Report Description
Memory Usage Displays the amount of memory available, both used and free.
Process Status Lists which processes are running.
Board Info Displays hardware-related information, such as boot and board version, FPGA
version, SIMM type, available hardware devices, physical memory size
(SDRAM, BRAM, FLASH), and FLASH memory type.
OS Info Displays information related to the Linux operating system on the controller.
Up time Shows the time since the last reboot.
DB File Info Lists persistence-related database files.
Ping Host Pings the host from the controller (based on the current host IP or name).
•
Example of a successful ping result:
2 packets transmitted, 2 packets received, 0% packet loss
•
Example of a failed ping result:
2 packets transmitted, 0 packets received, 100% packet loss
Check Route Checks route information from the controller.
DMA Info Shows the status of the DMA IO interface.
Update History Lists all updates to the firmware for the selected controller.
Runtime Logs Provides daily critical runtime information.
System Logs Provides daily critical system information.
Reader Activity Displays raw reader activity.