Lencore G8350, Руководство по эксплуатации

Страница: 15 / 35

Masking Mute:
Press the FUNC button until “Mask Muter” is displayed.
OP/Channel:
Press the OPT button until “OP” is displayed.
Press the SEL button until the curser is on the value to change (OP number, channel letter, or
volume).
Use the up and down
arrows
to increment and decrement the selected value.
Zone:
Press the OPT button until “ZN” is displayed.
Press the SEL button until the curser is on the value to change (Zone number or volume). Use
the up and down
arrows
to increment and decrement the selected value.
Music and Paging Functions have no relevance for this unit.
Faults:
Press the
FUNC
button until “Faults” is displayed.
Press the
SEL
button until the curser is on the value to change (Clear, Mute, Fault number).
Use the up and down
arrows
to scroll through the fault list.
If the curser is on Clear or Mute, the up or down arrow will clear or mute the fault.
The
OPT
button has no use for Faults.
Using the System
System Reset
In the unlikely event of the unit locking-up, pressing the Reset button will cause the unit to re-boot.
I/O Setup:
Press the FUNC button until “I/O Setup” is displayed.
I/O number:
Press the SEL button until the curser is on the I/O number.
Use the up and down arrows to increment and decrement the I/O number.
I/O options:
Press the SEL button until the curser is on the I/O options.
Use the up and down arrows to change the I/O to Supervised, Normal, or Disabled.
Note: A Supervised input must include an EOL (end of line) resistor. A Normal input does not need and EOL resistor.
Voltages:
Press the FUNC button until Voltages is displayed.
Press the OPT button to select the various voltages to display.
Note: Voltages cannot be changed, they can only be monitored.
10