INTERFACING WITH TH
E SYSTEM
What You Need
:
•
A
Web
browser on your computer (
Chrome, Firefox, Edge,
Safari...)
USER OPERATION
Note
: After you are done accessing t
he system
with your laptop, do not forget to
go back into TCP/IPv4 Properties and select “obtain IP address automatically”.
1.
Open your Internet browser – YOU
MAY
GET AN ERROR MESSAGE AS
YOUR HOME
PAGE WILL NOT OPEN PROPERLY! THIS IS
TO BE EXPECTED.
2.
After receiving the error message
, go to the URL box where you normally type in a URL
address, such as
www.lencore.com
and type in the following default IP address:
192.168.100.225
Do not include www or http.
3.
After you type in the correct address such as, 192.168.100.225, press return and you will see
the Lencore
System
Manager displayed in your Internet browser.
4.
You will be prompted with a box asking for a username and password. (see pg.
6
)
Mac OS
27
•
Go to System Preferences
•
Select Network
•
On the left menu, select Ethernet.
•
Select the drop down menu of configure IPv4, and select manually
•
Enter the IP Address 192.168.100.200
•
Press Tab to jump to Subnet Mask, this should be set to 255.255.255.0
•
Press Tab to jump to the router section. This is the same as Default
Gateway. This must match the gateway assigned to the system if a specific
gateway was entered.(Ex. 192.168.100.254)
•
Click apply to save your settings
•
Your computer is now ready to talk to the system
Содержание G8350
Страница 1: ...OPERATIONS MANUAL i Net Rack Mounted Headend Enclosure Model G8350 Document Number 200 0008 Rev F ...
Страница 9: ...Wiring 4 ...
Страница 20: ...Configuring The Time Settings 15 ...
Страница 24: ...Configuring The SMTP Settings 19 ...
