Lencore G8350, Руководство по эксплуатации

Страница: 17 / 35

INPUTS
The INPUTS LEDs are indicators for system inputs. IN1 represents the Mute masking input. A
blinking input LED indicates a fault has occurred. IN2-IN12 are for future use.
Relays
Relay R1 LED indicates a general fault. When the LED is on, no fault exists and Relay R1 is
energized. When the LED is off, a fault has occurred and Relay R1 is de-energized. R2, R3, and
AUX LEDs are for future use.
Protocessor
The Protocessor LEDs indicate the state of the Protocessor.
The ERR LED will go on solid 15 seconds after power up. It will turn off after 5 seconds. A steady red light
will indicate there is a system error on the unit. The RUN LED will start flashing 20 seconds after power
indicating normal operation. The SPL LED will be off for normal operation.
12