ETERNAL RIVAL
{Aegis} High Tier Enclosure
[Art] Fighstick/Stickless/
Keyboard Style
Manual
Hardware
1A
1B
2
3A 3B
4
5
6
Included with
additional
acrylic top
spacer (b)
Included with
additional
acrylic
bottom spacer
panel (E2)
(X) indicates the qty with additonal plexi spacer add-on
{X} indicates the qty for Aluminum Top (Aegis Case)
*Joystick hardware in a seperate ziplock bag with directions
*Brook PCB stands in a seperate ziplock bag with directions
x8(4){4}
(4)
x6
x14-18
(14){22}
x14
x14
x6
{x4}
7
(4-8)
A
B
C
CC
D
E E2
***Will vary depnding your button layout
Mounting
Top Spacer - add on
Top
Inner Back Panel
Inner Front Panel
Bottom Window
Bottom
(Bottom Spacer - Add on)
F1
F2
Outer
Back Panel
Outer
Front Panel
P1
P2
x2 inner
side panels
G
x2 Outer Side
panels
Joystick
Spacer
H
{Alumium Panel for Aegis
fightstick}
Artwork if Purchased
1A
A
2
2
C CC
1A 1B
3A 7
B
A
Notice
Countersink hole
on top. Screw will be
flush to the panel.
Notice
Countersink hole
on top. Screw will be
flush to the panel.
Step 1 - Mounting joystick and PCB
Step 2 - Assembling the top
3. Place flat head (1a) screw into
countersink holes and
screw it to the the
metal stands (2) by hand x2
1. Place (C) on top of (A) and hold it together by hand
screwing the pillar (2) to the screw (1a) placed through
the 2 panels. -If you have artwork you will place below
top panel (c)
-If you have a spacer panel (b) use screw (1b)
-If you have the alumium plate (CC) you will have to use
screw (3A) along with the washer (7) (Panel B included
with aegis enclosure)
2. Once the top panels are assmebled you can
place the buttons in.
1. Mount the joystick*
2. Mount the Brook PCB*
*Directions in seperate ziplock bag.
