Page 10
Transmitter Installation:
Ensure that the batteries are installed in the transmitter.
1.
From the left side of the bike, use a 3 mm hex key to re-
2.
move two counter sunk hex head screws located on the
inside of the drive cover. (See illustration below.)
Position the transmitter next to the cover.
3.
Note:
Th e RPM sensor at the back of the transmitter will align with
the indentation in the back of the drive cover.
Batteries
& Cover
M4 x 40 (2)
Transmitter
Drive
Cover
INSTALLATION OF PILOT
