Page 9
INSTALLATION OF PILOT
Console Battery Installation:
Loosen the battery cover screw and remove the battery
1.
cover from the console.
Insert 2 AA batteries into the battery compartment and
2.
reinstall the battery cover.
Batteries, AA x 2
Handlebar
Console Clamp
Mounting
Screws
Battery Cover &
Screw
Console Installation:
Ensure that the console turns on.
1.
Spread the bottom of the console clamp apart and clamp
2.
it back together over the top center of the handle bar.
Insert a mounting screw into each hole and use a 4-mm
3.
hex key to tighten the screws.
