LEMAN PRC016, Руководство по эксплуатации, Страница: 23 / 38

H
Operating Manual & Parts List
DESCRIPTION
Radial Arm Drill Presses feature a heavy cast iron base, a working
table and head. Head moves 12
1 /
2
”
forward and backward using a
rack and pinion. Head also swivels 360
°
around column, tilts 90
°
left and 45
°
right. The worktable height can be also adjustable by
using rack and pinion. The table can be tilted 45
°
both right and left,
and rotates 360
°
on a vertical axis. The work table surface is
precision ground which features slots for secure, accur ate
mounting of work- piece. Other features of the drill press are an
enclosed ball bearing quill assembly, quick belt change and
tension mecha-nism, positive quick-adjust feed depth stop and a
1 /
3
HP, 1725 RPM motor. Chuck and chuck arbor are included.
The drill presses are ideal for use in home shops, mainte- nance
shops and light industrial applications. Spindle speeds are
adjustable for drilling steel, cast iron, aluminum, wood and plastic.
UNPACKING
Check for loose, missing or damaged parts. If any damage or loss
has occurred, claim must be filed with carrier immediately. Check
for completeness. Immediately report missing parts to dealer.
Drill press is shipped unassembled. Locate and identify the
following assemblies and loose parts (Refer to Figures 1 and 2):
MODELZQJ3116 BENCH DRILL PRESS
A Head Assembly
B Column Assembly with Rack and Retaining Ring
C Base
D Table and Bracket Assembly with Worm Gear
E Quill Feed Handle (3)
F Bracket Locking Handle
G Table Crank Handle
H Shoe
I Drill Chuck with Key
Not Shown: M8 x 20 Hex head bolts (4), M8 x 100 Hex head bolts
(4), M8 Flat washers (4), M8 Hex nuts (4), and 3mm and 4mm hex
wrenches.
B
A
D
F
I
C
E G H
Figure 1
–
ModelZQJ3116 Unpacking
MODEL ZQJ3116A FLOOR DRILL PRESS
A Head Assembly
B Column Assembly with Rack and Retaining Ring
C Base
D Table Arm and Bracket Assembly with Worm Gear
E Extension Arm
F Table
G Drill Chuck with Key
H Table Crank Handle
I Bracket Locking Handle
J Table Locking Handle
(2) K Quill Feed Handle (3)
Not Shown: M10 x 40 Hex head bolts (4), M8 x 100 Hex head bolts
(4), M8 Flat Washers (4), M8 He nuts (4), and 3mm and 4mm hex
wrenches.
A
B
F
K
E
J
D
G C
I
Figure 2
–
Model 80342 Unpacking
IMPORTANT:
The tool has been coated with a protective coating.
In order to ensure proper fit and operation the coating must be
removed. Remove coating with mild solvents such as mineral spirits
and a soft cloth. Nonflammable solvents are recommended.
After cleaning, cover all exposed surfaces with a light coating of oil.
Paste wax is recommended for table to place.
CAUTION:
Never use highly volatile solvents. Avoid getting
cleaning solution on paint as it may tend to deteriorate these
finishes.
Use soap and water on painted components.
SPECIFICATIONS
MODEL ZQJ3116
Chuck size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16mm, B16
Spindle taper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. B16
Spindle travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.15
”
Quill diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.57
”
Quill collar diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.05
”
Column diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.36
”
Speeds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
RPM . . . . . . . . . . . . . . . . . . . . . . .
Swing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-34
”
Head tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
°
L, 45
°
R
Table size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1 /
8
x 8 5 /
8
”
Table slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 /
16
”
Base size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1
/
2
x 8
1
/
4
”
Base working surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 x 6
”
Drilling capacity (cast iron) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 /
2
”
Distance, spindle to table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 /
4
-13 1 /
4
”
Distance, spindle to base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
”
Overall height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
”
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 lbs
MODEL ZQJ3116A
Chuck size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16mm, B16
Spindle taper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.B16
Spindle travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 3.15
”
Quill diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.57
”
Quill collar diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.05
”
Column diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.76
”
Speeds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2
MT2 OR
500-2450(50Hz)/600-2920(60Hz)
Motor
see name plate
MT2 OR
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EN