LeMaitre 7210386, Руководство по эксплуатации и обслуживанию, Страница: 6 / 61

6
UNPACKING THE COMPONENTS
Carefully unpack and inspect all components shipped with your LeMaitre Vascular TRIVEX System. If any
parts are missing or damaged, contact your LeMaitre Vascular representative. Save the carton and packing
materials in the event a component must be returned for repair.
ASSEMBLE CONTROL UNIT TO CART
1. Place the stand with roller base on a smooth level surface with the rear panel facing you.
2. Remove the 3/16” Allen wrench from the base of the irrigation mast. Using the Allen wrench, remove
the four bolts securing the rear panel to the roller base.
3. Align the base of the control unit with the top of the roller base and lower the control unit straight
down onto the roller base (figure 2).
4. For each of the four drawer latches located in the interior of the roller base: lift and engage the latch,
then turn the latch key one half turn clockwise. Fold the latch key flat.
5. Replace the rear panel and reinsert the four bolts.
ASSEMBLE HANDLE TO MAST
6. Remove the four irrigation mast mounting bolts from the rear of the control unit.
7. Assemble the handle to the mast by: removing the two 1/4-20 x
5/8” socket head screws and
washers from the handle using the 3/16” Allen wrench and then place the handle inside the
box section of the mast weldment. Orient the handle so the threaded inserts align with the
hole openings in the box section of the weldment. Secure the handle with the two, 1/4-20 x 5/8” socket head screws and washers.
8. Fit the irrigation mast with handle onto the rear of the control unit and secure it with the four irrigation mast mounting bolts.
C
AUTION: Make sure the wheels on the TRIVEX System roller base are locked to prevent the system from rolling during setup and use.
TRIVEX SYSTEM CONTROL UNIT FRONT PANEL
CONTROL UNIT FRONT PANEL
1. Tumescence Pump Door – covers the tumescence pump hardware.
2. Saline Pump Door – covers the saline pump hardware.
3. TRIVEX System Display – contains the push buttons and displays for system operation.
FRONT PANEL CONNECTORS
There are four connectors on the front panel:
4. Fiber Optic Cable Connection Port – self-closing port designed to accept the TRIVEX Light Source Adaptor (REF 7210375).
CAUTION: Use of any other light source port adaptor may cause reduced light emission from the fiber optic cable or damage internal components, including the
light source bulb.
5. Two Footswitch Tubing Connection Ports – accept tubing for the TRIVEX System footswitches.
6. Resector Handpiece Cable Connection Port (accepts the Resector Handpiece cable)
Figure 3: Control Unit Front Panel
1
3
2
4
5
6
Figure 2: Assemble Control Unit to Stand