Lektri-Co 1P7K, Руководство пользователя и инструкция по установке

Страница: 24 / 42

1P7K user and installation manual 24
If the front LED is lit solid red, a general error occurred. Disconnect the
electrical car and try restarting the charger. A more detailed description of the
error is available through the charger’s user interface. If the problem persists
please contact and contact the manufacturer or your local supplier. For contact
details see 8.2 Support.
CANNOT ACCESS THE CHARGER IN THE LEKTRICO APP
Make sure you are connected to the same Wi-Fi network as the charger.
Make sure that your router is capable of multicast DNS (mDNS) and DNS
Service Discovery (DNS-SD).
Restart the router and charger.
RESET TO FACTORY DEFAULTS
If the charger continues to malfunction try to reset the device to factory
defaults.This option is available in the Lektrico Mobile App. If the charger is not
accessible via the app, make sure that the charger is powered and carefully
remove the front cover. Removing the front cover reveals the top part of the
PCB where the reset to factory defaults button can be found (see Fig. 16).
Push the button for at least 5 seconds using an insulated screwdriver.
Fig. 16 Reset to factory defaults button