Lektri-Co 1P7K, Руководство пользователя и инструкция по установке

Страница: 15 / 42

1P7K user and installation manual 15
CAUTION
Due to the danger of electric shock, the electrical installation
for the power supply of the charger must be always carried out
by qualified personnel and in accordance with the electrical
regulations applicable in your country.
Failure to do so may result in electric shock which can be fatal
or cause serious physical injuries.
NOTE
Because the installation of the 1P7K charger differs from user
to user, the required electrical equipment (e.g. breaker, wiring,
installation accessories) is not unique and therefore is not
delivered with the 1P7K charger.
4.4. INSTALLATION STEPS
Depending on where the 1P7K charger will be placed, there are two methods to
install the charger:
1. Installation on a wall.
2. Installation on a metal pillar.
When deciding which installation method is best suited for you consider the
recommendations described in section 4.2 Plan the installation.
4.4.1. INSTALLATION ON A WALL
To install the 1P7K charger on a wall follow the installation steps described
below.
Installation steps:
1. Remove the charger from its packaging and make sure that all the
components are included:
• the front cover of the charger;
• • the main body of the charger (electronic PCB installed in the
plastic enclosure);
• • charging cable with type 2 connector (5m in length) already
connected to the electronic PCB;
• Quick installation guide with integrated drill template;
For more details see Fig. 1 Main components of the 1P7K charger.