14
29
10
13
12
11
28
28
Welding joint
Welding rod
Lever
7.3 Positioning the device
• Position the automatic welder over the joint to be welded.
•
The guide roller (10)
must be
located in the welding joint
.
•
Fold up the wire pressure roller (11)
using the lever of the wire pressure roller (13)
.
•
Insert the welding rod
through
wire guide eye (12)
and
wire guide tube (29)
, pull through under the
wire
pressure roller (11)
and place in the
welding joint
.
•
Lower the wire pressure roller (11)
by actuating the
lever of the wire pressure roller (13)
.
• Check whether the
welding rod
is correctly located in the
welding joint
and centrally under the
wire
pressure roller (11)
.
• To grout the linoleum, the
linoleum flap (28)
must
be folded down (closed flap).
• For welding PVC, the
linoleum flap (28)
must be
folded up (opened flap).
Closed flap for linoleum
Open flap for PVC
Do not touch moving parts
There is a risk that fingers or other body parts may become trapped and crushed. Do not handle any
other moving parts when operating the wire thrust roller lever.
Risk of burning
Do not touch the metallic surfaces of the linoleum flap and the welding nozzle when hot. Only open or
close the linoleum flap by moving the black plastic lever of the linoleum flap. Be careful when inserting
the welding rod.
