18
7.8 Pedal Unit
The
pedal unit (7)
enables you to position the
material as both hands remain free as well as
to start and stop the welding process. Using the
left-hand
pedal (7A)
, you can lift the upper
roller in order to position the material. You can
start and stop the welding process with the
right-hand pedal (7 B)
.
Danger:
Take care not to confuse the two
ped-
als (7 A + 7 B)
of the pedal unit
– particularly
if you want to position the material and inadver-
tently start the welding process. This can result in
burns to the hands.
Orientate yourself at the separating wall between
the two
pedals (7 A + 7 B).
7.7 Feet
Turn the
feet (6)
clockwise (seen from above),
to turn the feet downward and turn the feet
anticlockwise, to turn the feet upward. Ensure
that the machine is suitably and securely
positioned before it is commissioned.
7.9 3 bar Pressure Reducing Valve
Compressed air cylinders are used to move the AHAM. For this purpose, a pressure reducing valve has been installed in
the pneumatic cabinet. This is preset to max. 3 bar. The reduced pressure helps prevent serious injuries when the AHAM is
swiveled in.
Caution:
Do not remove the cover sheet.
Do not adjust the pressure. This can lead to injuries when the AHAM is swiveled in. In addition, the machine
is also worn down more quickly.
7 A
7 B
7
6
