manualshive.com logo in svg

Leister SEAMTEK 900 AT, Руководство по эксплуатации

Поделиться
Скачать
Leister SEAMTEK 900 AT Скачать руководство пользователя страница 14

14

Z Direction

Turn the 

adjusting screw (Z)

 in direction (+Z), 

to position the 

welding nozzle (12)

 higher and 

in direction (-Z), to position the nozzle lower. 
Lock the 

adjusting screw (Z)

 in place with the 

clamping lever.

Y Direction

Turn the 

adjusting screw (Y)

 in direction (-Y), 

to move the 

welding nozzle (12)

 away from the 

rollers and in direction (+Y), to move the nozzle 
in the direction of the rollers. Lock the 

adjusting 

screw (Y)

 in place with the clamping lever.

X Direction

Turn the adjusting screw in direction (-X), to 
move the 

welding nozzle (12)

 to the left and in 

direction (+X), to move the nozzle to the right. 
Lock the 

adjusting screw (X)

 in place with the 

clamping lever.

Now set the 

welding nozzle (12)

 to the welding position under the “welding conditions” tab (set everything to “Automatic” mode).

Each time an arm, the 

transport rollers (9)

, or 

welding nozzle (12)

 are changed, the position of the nozzle must be sub-

sequently readjusted. Before readjusting the 

welding nozzle (12)

, remove the mounted guide, where applicable. Turn the 

welding nozzle (12)

 in the starting position as far as possible away from the machine to ensure that the 

welding nozzle (12) 

does not collide with the machine when swiveling into position.

Slightly tighten the clamping lever for the positioning screws once the 

welding nozzle (12)

 has been adjusted. Initiate Start Weld to check that 

the 

welding nozzle (12)

 does not come into contact with anything when 

swiveling in and out. Adjust the angle of the nozzle as necessary.

The closer the 

welding nozzle (12)

 is to the 

transport rollers, the higher the energy entry 
is in the welding zone, or rather the adjustable 
welding temperature will be lower for the same 
weld result. 
The 

welding nozzle (12)

 must be positioned at 

a suffi  cient distance from the welding zone to 
ensure contact-free [no direct contact with the 

welding nozzle (12)

] material supply.

Adjust the 

welding nozzle (12)

 such that mini-

mal noise emissions occur.

7.1.2 

Welding Nozzle Position and Heat Input

Z

-Z

+Z

Y

-Y

+Y

X

+X

-X

9

12

Warmer

Colder

12

12

Содержание SEAMTEK 900 AT

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды