manualshive.com logo in svg

Leica VT1000S, Руководство по эксплуатации

Поделиться
Скачать
Leica VT1000S Скачать руководство пользователя страница 31

31

Leica VT1000 S – Vibrating-blade microtome

7.

Cleaning and Maintenance

Fig. 31

7.2

Changing the fuse

Before changing a fuse, always switch off the instrument first and remove the instrument ca-
ble completely. The instrument must have cooled down and the paraffin tank must be empty.
When changing a fuse, do NOT use any fuses other than the spare fuses supplied with the in-
strument.

If the instrument fails completely, first check the
power supply at the power socket.
Then check the fuses at the rear side of the in-
strument.

To do so, proceed as follows:

•

Using a screwdriver (

13

), carefully push out

the fuse insert (

14

) 

(Fig. 31).

•

Remove the fuse insert - it contains two
fuses (

15

).

•

Check that the thin wire (

16

) in the glass cap-

illary of a fuse is intact. If not, replace the fuse
(the standard scope of delivery includes two
replacement fuses).

Before plugging the power cable
back in and switching on the instru-
ment, you must have identified and
corrected the cause of the burned-out
fuse.

•

Insert the fuse insert with the two fuses and
start up the instrument again.

1 4

1 5

1 3

1 4

1 6

Содержание VT1000S





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды