Leica M10- P ASC 100 Edition, Инструкция по эксплуатации

Страница: 8 / 116

EN
8
Safety Remarks
SAFETY REMARKS
GENERAL INFORMATION
• Do not use your camera in the immediate vicinity of devices that
generate powerful magnetic, electrostatic or electromagnetic
fields (e.g. induction ovens, microwave ovens, television sets or
computer screens, video game consoles, cell phones, broadcast-
ing equipment). Their electromagnetic fields can interfere with
recordings.
• Strong magnetic fields, e.g. from speakers or large electric
motors, can damage the stored picture data or disrupt recording.
• Switch off the camera, remove the battery and switch the
camera back on if the camera malfunctions due to the effects of
electromagnetic fields.
• Do not use the camera in the immediate vicinity of radio
transmitters or high-voltage power lines. Their electromagnetic
fields can also interfere with recordings.
• Always store small parts e.g. the accessory shoe cover as
follows:
– out of the reach of children
– in a safe location, where they will not get lost or stolen
• State-of-the-art electronic components are sensitive to static
discharge. You can easily pick up charges of several 10,000 volts
by simply walking on synthetic floor coverings. A static discharge
can occur when you touch the camera, and especially if it is
placed on a conductive surface. A static discharge on the
camera housing poses no risk for the electronics. Despite built-in
safety circuits, you should avoid direct contact with external
camera contacts like those in the flash shoe.
• Take care not to soil or scratch the sensor for lens detection in
the bayonet. You must similarly prevent direct contact of the
bayonet with grains of sand or similar particles, as these could
cause irreparable damage. This camera component must only be
cleaned with a dry cloth.
• Use a cotton or linen cloth instead of an optical micro-fiber cloth
(synthetic). Before touching the contacts, you can make sure you
discharge any electrostatic charge by deliberately touching a
heating or water pipe (conductive, grounded material). Dirt
deposits and oxidation on the contacts can be avoided by storing
your camera in a dry location with the lens cap attached and all
covers in place.
• Use only accessories specified for this model to prevent faults,
short circuits or electric shock.
• Do not attempt to remove parts of the housing (covers) yourself.
Repairs must be done at authorized service centers only.
• Protect the camera against contact with insect sprays and other
aggressive chemicals. Petroleum spirit, thinner and alcohol must
not be used for cleaning. Some chemicals and liquids can
damage the camera housing or the surface finish.
• Rubber and plastics are known to expel aggressive chemicals
and should therefore not be kept in contact with the camera for
extended periods of time.
• Prevent any sand or dust or water penetration into the camera,
e.g. during snowfall or rain or on the beach. Be extra careful
when changing the lens and inserting or removing the memory
card and battery. Sand and dust can damage the camera, the
lens, the memory card and the battery. Moisture can cause
malfunctions and irreparable damage to the camera and memory
card.