Leica M10- P ASC 100 Edition, Инструкция по эксплуатации

Страница: 77 / 116

EN
77
Picture mode
SELF-TIMER
You can use the self-timer to take a picture with a delay of either 2
or 12 s. This is useful for group photographs in which you want to
be included or if you want to avoid blurring caused by an unsteady
hand.
We recommend that the camera is placed on a tripod.
▸ Select
Drive Mode
in the main menu
▸ Select
Self Timer 2 s
or
Self Timer 12 s
in the submenu, depending on
which delay time you want.
▸ Shutter release
• A fl ashing LED at the front of the camera counts down the
fi rst 10 s time delay if 12 s delay were selected. The same
countdown is shown in the LCD panel.
• The self-timer function can be canceled at any time while the
12 s are counting down by pressing the
MENU
button – the
relevant setting remains intact and can be restarted by
tapping the shutter button.
Note
In self-timer mode, the exposure value is set just before the picture
is taken and not when the shutter button is pressed.
FLASH PHOTOGRAPHY
The camera determines the necessary fl ash intensity by fi ring one
or more ranging fl ashes, fractions of a second before taking the
actual picture. The main fl ash fi res immediately after to enable
exposure. All factors infl uencing the exposure (e.g. fi lters, aperture
settings, distance to the main subject, refl ective ceilings, etc.) are
automatically considered.
COMPATIBLE FLASH UNITS
The following fl ash units enable all Leica M10-P functions described
in this manual:
• Leica system fl ash units like the models SF 26, SF 40, SF 60,
SF 64.
• Other Leica system fl ash units (exception: Leica SF 20)
• Other commercially available fl ash units with a standard fl ash
foot and positive center contact
1
(fi red by the center/X
contact).
• Studio fl ash units (fi red via synchronization cable)
Note
We recommend the use of state-of-the-art thyristor-controlled
electronic fl ash units.
1
The
Flash
setting should be used if fl ash units are used that are not specially
designed for the camera and do not automatically adjust the white balance on
the camera.