Leica M10- P ASC 100 Edition, Инструкция по эксплуатации

Страница: 68 / 116

EN
68
Picture mode
METERING MEMORY LOCK
We often want to arrange important image components outside the
center of the picture for design reasons and these components
may sometimes be very bright or very dark. Center-weighted
metering and spot metering, however, mainly capture an area in the
center of the image and are calibrated to an average gray scale
value.
Image subject or situations like the ones described above can be
easily handled in aperture priority mode using the metering
memory lock.
Notes
• A metering memory lock doesn’t make much sense in conjunc-
tion with multi-field metering, because a targeted capture of an
individual image component will not be possible.
• In conjunction with exposure lock, Live View also offers an
exposure simulation feature (see S. 67).
Aim at the important image component (using the metering field
for spot metering) or alternatively at another detail with average
brightness.
▸ Tap the shutter button
• The measurement is taken and saved.
• As long as the shutter button is held at the half-way mark, a
small red dot will appear in the viewfinder at the top in the
number line for confirmation, and the exposure time won’t
change, even if the lighting conditions change.
• Pan the camera to capture the final trim while keeping the
shutter button pressed.
▸ Shutter release
A change in the aperture setting after the metering memory lock is
set will not result in an adjustment of the shutter speed, i.e. the
end result would be an incorrect exposure. The metering memory
lock is canceled when you remove your finger from the shutter
button.