Leica ASP300 S Скачать руководство пользователя страница 68

Страница: 68 / 94

Instructions for Use, V 1.9 RevJ – 08/2017

5. Operation

The

RUN OPTIONS

function displays the options

with which the current program is started.

•

LEVEL TEST

enabled:

The lower level sensor in the retort is acti-

vated. The program is stopped with an error

message if the level is not reached.

•

WAVE MOTION

activated:

During each infiltration step, the reagent is

periodically pumped from the bottle to the re-

tort and back to achieve a more evenly mixed

blend. The first pump step begins after 16 min,

afterwards regularly after 12 min.

•

PRE-TEST

activated:

After the program is started, the retort is filled

and drained with the first reagent in the infil-

tration program (to test whether all lines and

valves are unobstructed).

•

STIRRER

activated:

The magnetic stirrer is on.

↓

Fig. 66

Important!

The options set apply for ALL programs!

All run options can be deactivated or activated according to requirements while the program is

running.

Содержание ASP300 S































































































Результаты поиска

Содержание ASP300 S

Отзывы:

Leica ASP300 S, Инструкция по эксплуатации, Страница: 68 / 94

Результаты поиска

Содержание ASP300 S

Отзывы: