Leica ASP300 S Скачать руководство пользователя страница 56

Страница: 56 / 94

Instructions for Use, V 1.9 RevJ – 08/2017

5. Operation

Remember that a program step cannot be copied if the program al-

ready contains the maximum number of 13 steps.

Remember that it is not possible to delete a step from a program

containing only one single step.

Programs must consist of at least one step.

• Use the

MOVE UP

MOVE DOWN

buttons to move program steps up or

down within an existing program without having to recreate those steps.

Deleting program steps

To delete a step from a program:
• Highlight the step you wish to delete.
• Press

CLEAR

Setting a delay step

A delay step is a step that is extended to ensure that a program will finish

at a specified time.
• Highlight the program step you wish to define as delay step.
• Touch the

DELAY

button.

The delay symbol is moved to the selected step, thus defining the step

as delay step.

Copying program steps

• Highlight the step you wish to copy.
• Touch the

COPY

button.

• If required, modify properties of the step.

Editing program steps

(continued)

Содержание ASP300 S































































































Результаты поиска

Содержание ASP300 S

Отзывы:

Leica ASP300 S, Инструкция по эксплуатации, Страница: 56 / 94

Результаты поиска

Содержание ASP300 S

Отзывы: