Leica ASP300 S Скачать руководство пользователя страница 62

Страница: 62 / 94

Instructions for Use, V 1.9 RevJ – 08/2017

5. Operation

Remote draining

• On the screen, select the reagent container

(No.

) and the receptacle (

External

Then press

STATION DRAIN

• Check that no reagent has leaked.

Remote filling

• On the screen, select an empty reagent

container (No.

) and the external receptacle

(

External

Then press the

STATION REFILL

button.

• The remote filling should be completed in less

than 170 seconds.

• Check that no reagent has leaked.

Select station

Press button

Filling/draining reagents

From the

FAVORITES

screen, press

MENU

. In

the

MENU FUNCTIONS

window, tap the

SMART

SCREEN

button.

The

SMART SCREEN

(

Fig. 53

) pops up. The smart

screen is the initial screen for manual operation

of the instrument.

Fig. 53

→

Fig. 54

Status bar

displayed in supervisor mode.

Status bar

The following values are displayed.
• Pressure and temperature of the retort

• Wax bath temperature

• Value of the level sensor of the retort

• Retort lid – closed or open

The following steps should only be

carried out by trained laboratory

personnel, experienced in handling

reagents.

Содержание ASP300 S































































































Результаты поиска

Содержание ASP300 S

Отзывы:

Leica ASP300 S, Инструкция по эксплуатации, Страница: 62 / 94

Результаты поиска

Содержание ASP300 S

Отзывы: