Leica ARveo, Руководство пользователя

Страница: 76 / 80

Manufacturer's declaration of electromagnetic compatibility (EMC)
74 ARveo / Ref. 10 747 384 / Version 04
15 Manufacturer's declaration of electromagnetic compatibility
(EMC)
The emissions characteristics of this equipment make it suitable for use in industrial areas and hospitals (CISPR 11 class A). If it is
used in a residential environment (for which CISPR 11 class B is normally required) this equipment might not offer adequate
protection to radio-frequency communication services. The user might need to take mitigation measures, such as relocating or
re-orienting the equipment.
This "Guidance and manufacturer's declaration" document is based on EN 60601-1-2.
15.1 Table 1 from EN 60601-1-2
Guidance and manufacturer's declaration – electromagnetic emissions
The ARveo surgical microscope is intended for operation in an environment as specified below.
The customer or the user of the ARveo surgical microscope should make sure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions in accordance with CISPR 11 Group 1 The ARveo surgical microscope uses RF energy only for its
internal function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
Conducted emissions in accordance with CISPR 11 Class A The ARveo is suitable for use in establishments other than
domestic and those directly connected to the public low-
voltage power supply network that supplies buildings used
for residential purposes.
Harmonic emissions according to IEC 61000-3-2 Class A
Emission of voltage fluctuations/flicker according to IEC 61000-3-3 Complies