Leica ARveo, Руководство пользователя

Страница: 47 / 80

Control unit with touch panel
ARveo / Ref. 10 747 384 / Version 04 45
9.3.1 User Setting Protection
To avoid unauthorized or accidental changes of user settings, each
user setting can be protected by a password/PIN. This keeps the
working parameters identical each time you load a protected user
setting. Changes can be done during the application but will not be
stored unless saved by pressing "Save" and choosing either the
"Save as current" or "Save as new" option, using the correct
password/PIN or by creating a new user and password/PIN
combination respectively.
Saving and protecting the user settings is done in two ways:
As a current user setting
You will receive a prompt for the password/PIN.
X
If a password/PIN was defined save the changes of the user
settings with entering the correct password/PIN.
If it is incorrect the system will go back to "Start values main".
X
Choose "Save as current" and enter the password/PIN again.
If no password/PIN was defined, you can define a password/PIN
(4-10 characters).
X
Press "OK" for re-entering and confirmation.
If the re-entered password/PIN does not match the enter/re-enter
process has to be repeated.
If no password/PIN should be defined, you can exit the procedure
by pressing "Skip" or before re-entering with "Cancel".
As a new user setting
You will receive a screen message and a prompt for the password/
PIN after entering the name of the user setting. If the settings
should be protected:
X
Enter a password/PIN (4-10 characters) and press "OK" for
re-entering and confirmation.
If no password/PIN should be defined you can exit the procedure
by pressing "Skip" or before re-entering with "Cancel".
If the re-entered password/PIN does not match the enter/re-enter
process has to be repeated.
The protection of a user setting by a password/PIN is indicated by
"(locked)" right after the user setting name on the GUI main page
or by a lock icon in front of the user setting name in the Select User
page.