40
iCONgrade, Operation
Laser Sensor and
MPM700 Electric Mast
To use the Laser Sensor with a power mast for controlling the elevation of the blade
complete the following steps:
1. Select the Laser Sensor in one of the sides.
2. Place the cutting edge of the blade at the wanted height.
3. Enter
SEEK
mode.
4. Press the
or
key to tell the mast in which direction it should start to seek. The
mast will now move in the given direction until the Laser Sensor detects the laser beam,
and has it in the center of the sensor.
5. Press the left
key to set the machine in Auto-Mode.
6. The
and
keys can now be used to move the mast up or down, and thereby
changing the elevation reference.
