Operating instructions
Operating the SuperVario® X
17
Switch off the machine.
Press and hold the button for switching
between speed and slide and the + button
to switch the machine on.
Keep all three buttons pressed for about
three seconds.
The slide performs its reference run.
The display shows approx. 240 as the upper value and approx. 40 as the
lower value. Switch machine off at the main switch so that the values are
stored. If a slide reference run cannot be performed, the following message
flashes on the display: no slide calib.
Check the mechanical clearance of the slide and perform the reference
run again.
3.8 Setting the spreading width
The spreading width depends on the condition of the spreading material
and the speed of the spreading disk. The more coarse the spreading material,
the larger the possible spreading width.
1. Set the speed according to the spreading chart.
2. Set the casting blades according to the spreading chart.
