Operating instructions
Settings and displays
31
If the speed travelled at is lower than
the value stored in the spreading table
in the control, the message "Too slow"
appears in the display. The minimum
speed stored in the spreading table
is included in the calculation, not the
speed actually being travelled at.
Yellow mustard 2 km
Too slow
At a travel speed of less than 3 km/h,
the software does not work and the
message "Slide not open" appears.
Once the vehicle stops and sets off
again, the button "Slide open" must be
pressed again to open the slide.
When working with the headland
manager (VGM), this operation is not
required.
Slide not open
At the present time, our spreading tables are designed for a maximum speed
of 44 km/h, depending on the spreading material. At speeds faster than
44 km/h, the error message "Too fast" appears, depending on the spreading
material.
Note
A total of 12 spreading tables can be stored in the control panel. This setting
can only be made at the factory. Spreading tables can of course be exchanged
(see section “6.8 Spreading charts” on page 44).
