29
_________________________________________________________________________________
13. TRANSPORTING INSTRUCTIONS
Lower the booms down to transport position and lift the outriggers completely up to transport
position.
The outriggers are equipped (picture 10) with lifting points from which the machine can be
lifted if necessary. When lifting, it is advisable to use a lifting beam where the ropes are
mounted, in order to prevent the outriggers from being damaged.
Picture 10. Lifting the access platform (visualization)
There is an automatic hydraulic brake in the rear axle which engages automatically when the
engine/motor is not running.
If the machine is transported on a trailer or on a lorry or similar vehicle, it must be tied down
properly. There are four tie-down points marked on the corners of the chassis which make it
easy to tie down the machine. Always tie the machine down diagonally from every corner
(picture 11).
.
Picture 11. Tie-down points (visualization)
ATTENTION! It is not allowed to tie down the machine so that the ropes go over the
booms. Only marked tie-down points can be used!
ATTENTION! Transporting of this access platform is allowed in its transport position only.
No persons or materials are allowed to be transported on the platform.
