16
_________________________________________________________________________________
6. CONTROLS AND SWITCHES
6.1 Controls in platform
The controls and indicators on the control panel at platform may be slightly different in
different models. Indicators and switches that are marked as options are not mounted on all
models.
Picture 5.
Upper control panel’s levers, switches and buttons
1. Ignition switch: Stop - ON / Glow (diesel)
–
Start
2. Selector switch of propelling: electric motor
or combustion engine (option)
3. Platform rotation
4. Function selector switch (Drive
– Outrigger
operation
– Boom operation)
5. Glow indicator (diesel engine)
6. Low fuel level indicator
7. Platform overload indicator
8. Emergency stop switch
9. Control lever, lower boom
10. Control lever, upper boom
11. Control lever, slewing
12. Control lever, telescope boom
13. Control lever, jib-boom
14. Control lever, platform tilting
15. Drive speed selector switch (option)
16. Outrigger monitoring override button
17. Horn (option)
18. Control panel / platform worklight switch
(option)
19. Emergency lowering selector and button
20. Engine overheating indicator
21. Boom center position indicator (Slewing)
22. Engine oil pressure indicator
Outrigger monitoring override button (Picture 5, (16)) allows momentary boom operations
while outriggers are not in support position. When button is pressed, booms can be operated
for 3,5 seconds at a time
if booms are’t in transport position. The button is locked with a bolt
and the locking must be restored to its place after use.
Override button is for emergency
situations only!
For example if platform leveling cylinder has leaked and the platform has
slipped to the ground and use of outriggers to lift the platform is not possible due to small
storage space.
13
12
11
10
9
3
1
4
2
8
7
6
14
5
15
16
17
18
19
20 21 22
