17
NOVO Technical Handbook - NE41 15013-02 v2.0
Below are schematic illustrations of the accumulators.
Picture 14.
Standard NOVO accumulator.
Picture 15.
NOVO large capacity accumulator.
2.10.1 Replacing the accumulator
1. Power off the unit and disconnect the AC adaptor and any other cables from the
unit.
2. Remove the bottom cover by unscrewing the screw below the connector lid.
3. Disconnect the accumulator connector and remove the old accumulator.
4. Fit the new accumulator in the appropriate accumulator compartment, see
5. Connect the new accumulator in the accumulator connector, see "Picture 13".
6. Refit the accumulator lid, secure it with the screw and reconnect any cables.
2.11 Mounting the SIM card
Applies only to NOVO IP/Mobile, NOVO PSTN/GSM and NOVO PSTN+.
C4
C3
EA
C
B
A
H1
Picture 16.
SIM Hatch (H1) location.
Depending on model the SIM-hatch is made of either rubber (soft) or plastic (hard).
SIM cards should only be changed by the customer on NOVO products with a soft
SIM-hatch. To change SIM card on a NOVO product with a hard, plastic SIM-hatch
send the unit to NEAT Electronics or a certified distributor.
NOVO IP/Mobile, NOVO PSTN/GSM and NOVO PSTN+ only support micro SIM (3FFF).
