15
NOVO Technical Handbook - NE41 15013-02 v2.0
2.8 On/Off button (PS1)
The
On/Off button (PS1)
is not connected in series with the power source. This
means that the processor (CPU) can control when the unit shall be powered on and
off. The CPU can for instance shut off the unit to save the backup accumulator.
Please note that it isn’t enough to disconnect the AC plug to shut off the unit. The unit
will switch to the backup accumulator as power source.
2.9 Reset button
RH
Picture 11.
Reset hole (RH) location.
The Reset button is accessible through the
Reset hole (RH)
. To do a manual reset of
the unit, bypassing On/Off button, carefully push a pin with a dull end through the
hole until unit reboot.
After a manual reset the unit will restore alarm and event queues as well as the
previous Home/Away state and Presence/Ready state. It will also restore status on
whether Radio interference has been reported and whether Mobile network failure,
IP network failure or Mains failure alarms and/or events have been reported.
