LEGRAND 3 372 02, Технические характеристики

Страница: 28 / 40

26
FLUSH-MOUNTING CABINETS
6
FITTING THE DOORS
The solid or glass doors can be fitted to
open to the left or the right (see selection
table page 5).
The slots for the hinges and the door
release are provided on both sides of the
cabinet.
Door kit components: 2 axis, 2 hinges,
1 handle up to 5 rows or 2 handles from
5 rows, 1 key and 1 cross bolt and 2 lip
seals.
■ Finishes
To ensure the IP (Protection Index) of the
cabinet you must plug the holes in the
opposite of the hinges (1 at the top and 1
at the bottom) by using the cap supplied
with the cabinet.
■ Fitting the hinges
1- Fit and clip the hinges in the specified
slots on the door side.
2- Insert the axis of the hinge in the
specified hole.
3- Rotate the axis on 90° to lock the
system.
The axis should be properly clipped in
the specified location (see photo above).