LEGRAND 3 372 02, Технические характеристики

Страница: 13 / 40

11 DISTRIBUTION CABINETS XL
3
S 160
■ Fitting the hinges
1- Fit and clip the hinges in the specified
slots on the door side.
2- Insert the axis of the hinge in the
specified hole.
3- Rotate the axis on 90° to lock the
system.
The axis should be properly clipped in
the specified location (see photo above).
■ Fitting the handle
1- Fit and insert the handle in the hole at
the opposite of the hinges.
2- Insert the cross bolt at the back of the
handle, against the door.
3- Once the door released of the handle
installed, turn it with the key in lock position
in order to check the proper functioning.
Metal flat doors Cat. Nos 3 372 57,
3 372 58, 3 372 67, 3 372 68 and
glass doors Cat. Nos 3 372 77,
3 372 78, 3 372 87, 3 372 88 are equipped
with 2 handles.
The door axis are designed to be
and removed without tools. So the
door installation is made easier.
■ Equipotential link
You have to make an equipotential link
if control and signalling units or devices
with voltage U>50 V are fitted on the door.
The doors are equipped with studs
for connecting the equipotential link
conductor Cat. No 3 397 53.
1- Remove the dedicated plastic cover on
the cabinet (2 covers available). Then,
cut it to enable the cable to pass:
2- Put the plastic cover back in its
location, fit the cable on the stud of the
cabinet (with a M6 nut). Then, pass it
through the cover:
3- Remove the protection cover of the
earth stud on the door and fit the cable
end with the help of a M6 nut.
WWW.LEGRAND.COM