LEGA
srl
Costruzioni Apistiche
–
via Maestri del Lavoro 23
–
48018 Faenza
www.legaitaly.com - Tel 054626834
–
Fax 054628279
–
P.iva 00043230390
14 / 36
CAUTION!
Maintenance operations should be carried out after stopping the machine and
disconnecting electric power.
CAUTION!
1) Be extremely careful when handling the knife blades, e.g. during washing
2) Do not direct water jets towards electrical parts.
2.1 INSTRUCTIONS FOR THERMOREGULATOR USE
The thermoregulator located on the control panel has four keys and a display unit.
After connecting the DV4 machine to line power and waiting a few seconds, check the display unit for the knife
temperature reading.
Press the SET button to display the maximum selected temperature setting.
To change this temperature setting, press the SET (C) control then press the button with the arrow pointing up
(A) to increase the temperature degree value or the button with the arrow pointing down (B) to decrease it.
3.0 MAINTENANCE
No special maintenance is required.
The machine should be washed with warm water and mild detergents of the type commercially available for
stainless steel, if necessary.Do not in any case clean the machine with steam jets.
If you expect not to use the machine for a prolonged period of time, check the state of repair of its mechanical
parts and carry out any required checking, replacement or maintenance to ensure that the machine will be
ready for use upon the next power-on.
Before periods of prolonged inactivity, coat the chromium plated parts of the machine with a thin film of
paraffin oil and then cover the machine with a tarpaulin.
C
A
B
