LED
Bracket
Reset button
Button:
Short press reset button into learning mode, then the sensor can inclusion or
exclusion from the Z-Wave network.
Hold the key for 5s to reset the sensor, after reset, Sensor will send
“Device_Reset_Locally” to the main controller and exclude from the Z-Wave
network when the Button is released, this procedure will reset the Sensor to
factory default.
Short press button for 3 times then the sensor sending wake up notificati
on to gateway,
and LED will fast blink when sending data, send over then the L
ED turn off.
.
Specification
Detection angle
80 degrees
Detection distance
8 meters / 26.25 feet
