6.3
Low voltage alarm to remind changing battery.
This product has low voltage detection reminder, when the battery voltage is in low
status, the detector will give out low battery signal to controller.
7.
Attention
1.
If need to clean the sensor, please use a soft cloth with a little alcohol to wipe it after
you cut off the power.
2.
This product is just for indoor use.
3.
Replace the battery timely on low battery warning to ensure the detector works
properly. Please remove the battery and safe keeping, if you don’t use this product for
a long time.
4.
This device can be mounted on the wall only, it cannot be installed on the ceiling.
5.
The reference range template of PIR detection is tested at the indoor temperature
(the range is 20
℃～
25
℃
)
，
the target of the test is 77kg
±
10kg weight and 1.71m
±
0.3m height, the target of the test across movement speed is 4m/s
±
0.15m/s.
6.
In order to prevent the PIR sensor’s abnormal fault, please don’t mounting and
operating sensor in the bellow conditions,
Firstly, product mounting should prevent installed in the air flow environment such as
in front of the door, window, heater, air conditioner and so on.
Secondly, the PIR detection area should not be shielded by other screen.
Thirdly, if the operating temperature range is out of the defined range of product
specification may result in some product faults, which is not in the technique
commitment of manufacturer.
Fourthly, this product has mot pet immunity function, so when some animals go
through in front of the product may trigger PIR function reported.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
