2
Contact Sensor
Quick Start Guide
1.
Product Introduction
The LEEDARSON Door/Window Sensor is a wireless sensor that is powered by a CR2 battery. The
door/window sensor lets you know when a door or window is opened, or closed, and can trigger different
actions in response to that open action or close action.
This sensor uses
the
Z-Wave communication
module to connect with Z-Wave Gateway.
Th
is device can be adapted to
use in the
EU(868.42Mhz)
,
US(908.42MHz) or AU(921.42MHz).
The door/window sensor supports the Over The Air (OTA) feature for
the
product’s firmware upgrade.
If you want your Door/Window Sensor to be a security device that uses
secure/encrypted messages to communicate in a Z-Wave network, then a security enabled Z-Wave
controller/gateway is needed.
2.
Product Appearance
Product main components and function overview.
①
Reset: Hold the key for 5s to reset the sensor. After reset, Door/Window Sensor will send
“Device_Reset_Locally” to the main controller and exclude
it from the Z-Wave network when the button
is released. This procedure will reset the sensor to factory default.
②
LED indicator: If sensor has not been added to controller, the LED will blink for than 5 seconds. Once
the device is joined to the network successfully, the LED will stay on for 3 seconds.
Содержание 7A-SS-VE-H0
Страница 11: ... ...
