Leedarson 7A-SS-VE-H0, Быстрый старт

Страница: 10 / 11

10
9.3.8 Version Report Commands
Parameter Value (HEX)
Z-Wave Protocol Library Type 0x03
Z-Wave Protocol Version 0x04
Z-Wave Protocol Sub Version 0x34
Firmware 0 Version Firmware Version Upper 8 bits
Firmware 0 Sub Version Firmware Version Lower 8 bits
Hardware Version 0x01
Number of firmware targets 0x00
9.3.9 Basic Commands
There is no relevant commands are available for mapping. Sensor will send “Basic Set” via the lifeline group.
9.3.10 Configuration Command Parameters
Door/Window Sensor offers a wide variety of advanced configuration settings. Below parameters can be
accessed from
the main controller ’ s configuration interface.
Parameter Number of
Bytes
Default
Value Function Description
10 (0x0A) 1 10 Low Battery Power Level of alarm
threshold values: the value range
are 10~50 for percentage, so the
Battery Low Power level can
setting 10%~50%.
254 (0xFE) 1 0 Configuration Lock function: when
it was lock then the other
parameters value cannot change
unless this parameter.
0= unlock
1= lock
255*
(0xFF)
4 NA Value=0x8888888, Default=1,
Size=4
Reset to factory configuration and
removed the Z-wave network.
4 NA Value=0x88000000, Default=1,
Size=4
Reset Configuration parameter to
default value.
Note: Parameter 0xFF is a set-only parameter.