Lectrotab ELECTROMECHANICAL TRIM TAB SYSTEMS Скачать руководство пользователя страница 12

Lectrotab standard actuators  manufactured after October 1, 2009, are covered by a lifetime 

warranty to be free of material and workmanship defects for actuators installed on Lectrotab 

brand trim tabs with a Lectrotab control switch. Territories of Australia and New Zealand fall 

under and 7 year warranty for actuators connected to a complete Lectrotab system.

The warranty period ends when the actuator becomes unusable for reasons other than 

material and workmanship defects.

Standard actuator failures due to material and workmanship defects may be replaced with an 

exact or like model by obtaining a “Return Authorization” number from Lectrotab and 

sending the failed actuator back for warranty evaluation. If the returned actuator is deemed 

to be covered under warranty, a replacement actuator will be shipped to you ground freight, 

FOB Richmond, Virginia for domestic customers. An advanced replacement actuator may also 

be sent out prior to returning the failed actuator with a form of security provided by the 

customer or dealer. For International customers, please contact a Lectrotab distributor for 

warranty replacement information. 

Actuator failures due to normal wear and tear, misuse, abuse, neglect, negligence, incidental 

or consequential damages or a failure to follow Lectrotab’s written installation instructions 

are NOT covered by this lifetime warranty policy.

This lifetime warranty policy does NOT cover labor cost, hauling fees or any other associated 

fees pertaining to replacing the actuators or actuators installed in a non-Lectrotab trim tab 

system.

LIFETIME WARRANTY POLICY

Linear Devices Corporation, 11126 Air Park Road, Suite G, Ashland, VA 23005 

Phone: 804-368-8428, Fax: 804-368-8438, www.lectrotab.com

Lectrotab Part

Warranty Period

Actuators

5 years for actuators with serial numbers prior to
October 1, 2009 (*K09**)

Lifetime

for actuators with serial numbers on or after

October 1, 2009 (*K09**) (For warranty, actuators must be 
connected to Lectrotab brand tabs and control switch and one 
actuator per tab systems)
3 years from date manufactured for actuators installed with non-
Lectrotab parts or dual actuator per tab systems
(Australia and New Zealand fall under a 7 year warranty for 
actuators connected to a complete Lectrotab system)

Oval (SETR)

2 years 

Rocker Switch (SAF type)

2 years

ALC & MLC Controls

2 years

Tabs (T or TA)

5 years

To determine if a Lectrotab part is covered under warranty, please see the “Warranty Period” listed 

below. All Lectrotab parts have a serial number date code used to determine if the part is still within 
the warranty period. The actuator serial number is located on the right side of the upper cover. An 

example for actuators would be “AK09” (K represents the month of October in alphabetical order 

(skip letter I) and 09 the year). The Oval control serial number date code is located on the back side 
of the control on a label (SETR-61-ASSY, 0623, 06 represents the year and 23 is the 23 week of the 
year). 

12

Содержание ELECTROMECHANICAL TRIM TAB SYSTEMS













Отзывы: