31
YOUR FIRST RIDE
Setting
P12
P11
P16
P21
PAS
Strength
PAS
Sensitivity
Odometer
Reset
Walk Mode
Toggle
1
3
NA
1
Strength of PAS mode. When set
to higher numbers, the motor
will come on stronger. On lower
numbers, it will be more gentle.
Sensitivity of PAS sensor. When set
to higher numbers, it will take more
crank rotations for the motor to turn
on. On lower numbers, it will take little
crank rotation to turn on the motor.
Hold the plus button for 5 second to
reset the Odometer
Cruise Control
Cruise control on the Lectric XP works similarly to cruise control on
a car. To activate: hold the minus button while twisting the throttle.
The bike will try to maintain a speed based on the position of the
throttle when cruise control was activated. For example, if the
throttle is twisted all the way from its resting position (to a position
that would normally maintain 20mph) and the minus button is held,
cruise control will be activated and set at 20mph. Even if the bike
is currently going slower than 20mph, the bike will try to accelerate
and maintain that speed because it was set based on that throttle
position. To cruise at low speeds, only slightly twist the throttle and
hold the minus button. Cruise control can be deactivated at any time
by pulling the brakes. This will also cut power to the motor as it would
during normal operation.
0: Walk mode disabled
1: Walk mode enabled
Ensure you do not change settings that are not listed in the table. Changing other
settings may cause your bike to stop working properly. If you need the default settings
for the advanced settings menu contact Lectric eBikes.
Default
Explanation
Function
Other Display Functions
