Lectric XP 2.0 Скачать руководство пользователя страница 4

Страница: 4 / 41

LECTRICEBIKES.COM | 602.715.0907

WARNING!

Read this entire manual before assembling or using your new electric

bike. Do not modify, disassemble, or replace the original electrical

components on your bike. Doing so will invalidate your warranty and

could put you in danger. Riding any type of bike comes with some

risks which can’t be predicted or avoided. Taking proper care of bike

components can lower the risk of sudden failure of components

but cannot prevent it. These sudden failures could cause serious

harm, injury, or death to the rider. If you notice abnormalities in any

component on the bike, take it to a licensed mechanic to be repaired

or replaced immediately. Lectric eBikes LLC assumes no liability for

harm, injury, or death of the rider.

This manual is not intended to function as a detailed service manual.

Lectric eBikes recommends having your local bike shop mechanic

perform a detailed safety check of your bike before your first ride.

Ensure your local mechanic is experienced and reputable.

The Lectric XP can withstand most rain showers without sustaining

damage. The bike has an IP rating of 65. This means it is dust tight

and can withstand jetting water. See the IP code for more details.

It does not mean that the bike and its mechanical and electrical

components are waterproof. We do not recommend storing or using

the bike in excessively wet conditions. The warranty for the Lectric

XP does not cover water damage.

For technical assistance or warranty claims contact Lectric eBikes

(602) 715-0907

or email at

[email protected]

Содержание XP 2.0










































Результаты поиска

Содержание XP 2.0

Отзывы:

Похожие инструкции для XP 2.0

Бренды по названию

Популярные бренды

Lectric XP 2.0, Руководство пользователя

Результаты поиска

Содержание XP 2.0

Отзывы:

Похожие инструкции для XP 2.0

Бренды по названию

Популярные бренды