LeCroy HFP1500, Инструкция по эксплуатации

Страница: 49 / 50

Appendix A
HFP1500-OM-E Rev E
A–1
Appendix A
PERFORMANCE VERIFICATION TEST RECORD
This record can be used to record the results of measurements made during the performance ver-
ification of the HFP1500 High Frequency Probe.
Photocopy this page and record the results on the copy. File the completed record as required by
applicable internal quality procedures.
The section in the test record corresponds to the parameters tested in the performance verification
procedure. The numbers preceding the individual data records correspond to the steps in the pro-
cedure that require the recording of data. Results to be recorded in the column labeled "Test
Result" are the actual specification limit check. The test limits are included in all of these steps.
Other measurements and the results of intermediate calculations that support the limit check are to
be recorded in the column labeled "Intermediate Results".
Permission is granted to reproduce these pages for the purpose of recording test results.
Probe Model: HFP1500
Serial Number: _______________________
Asset or Tracking Number: _______________________
Date: _______________________
Technician: _______________________
EQUIPMENT USED:
1The function generator used in this Performance Verification Procedure is used for making relative measurements. The
output of the generator is measured with a DMM or oscilloscope in this procedure. Thus, the generator is not required to
be calibrated.
MODEL SERIAL
NUMBER
CALIBRATION
DUE DATE
OSCILLOSCOPE
DIGITAL MULTIMETER
FUNCTION GENERATOR
1
N/A