LeCroy HFP1500, Инструкция по эксплуатации

Страница: 13 / 50

Features and Accessories
HFP1500-OM-E Rev E
3–3
Bent Sharp Tip
Made out of titanium, this tip is ideal for situations that
require the user to hold the probe parallel to the circuit
board under test. Also gives the user more control when
holding the probe like a pencil. Fits in either probe
socket.
PACC-PT005, package of 4.
B. Clips
Micro Clip (0.5 mm)
A pincher like tip designed to hold onto fine pitch leads
and small components, commonly found in SMD ICs.
Fits in either probe socket, or can be used with a lead.
The Micro Clip is an optional accessory for the
HFP1500
PACC-CL001, package of 4.
Clip (0.8 mm)
A pincher like tip designed to hold onto larger wires and
components than possible with the Micro Clip, including
through-hole mounted components.
This clip cannot be connected directly into either of the
probe head sockets; it must be connected to a lead.
PK006-4, package of 2.
Ground Spring with Hook
A flexible spring connected to a square pin that fits into
either of the probe head sockets. Designed to be used
as a ground lead, there is a hook on the end of the
spring so that it can probe general circuits.
PACC-LD001, package of 4.