13
15
1
15
1
39
40
40
41
Locking
Pin
Locking
Pin
ADJUSTING THE WEIGHT RESTS
To change the height of the Weight Rests (15),
remove them from the Uprights (1) and insert them
into a different set of holes in the Uprights. Rotate
the Weight Rests so that the locking pins are
wrapped around the Uprights
.
WARNING:
Always rotate the
Weight Rests (15) so that the locking pins
are wrapped around the Uprights (1).
Always set both Weight Rests at the same
height.
!
ATTACHING WEIGHTS TO THE BARBELL
Slide the same amount of Weight (40) onto both
ends of the Barbell (39). Then, slide the two Spring
Collars (41) against the Weights.
WARNING:
Always secure
Weights on the Barbell (39) with the
Spring Collars (41). Do not place more than
110 lbs. (49 kg), including the Barbell and
Weights, on the weight rests.
!
