12
6
1
8
2
14
1
ADJUSTMENT
Make sure that all parts are properly tightened each time the weight bench is used.
Replace any worn parts immediately.The weight bench can be cleaned with a damp
cloth and a mild, non-abrasive detergent; do not use solventsto clean the weight
bench
Locking
Pin
ADJUSTING THE BACKREST
The Backrest (8) can be used in a declined position,
a level position, or either of two inclined positions.
To use the Backrest in the declined position,
remove the Backrest Support (14) and lay the
Backrest on the Crossbar (2).
To use the Backrest (8) in the level position or an
inclined position, lift the Backrest and insert the
Backrest Support (14) into one of the sets of holes
in the Uprights (1). Rotate the Backrest Support so
that the locking pin is wrapped around the Upright.
WARNING:
When using the
Backrest (8) in a level position or an
inclined position, make sure that the
Backrest Support (14) is inserted completely
into both Uprights (1) and that it is
turned to the locked position.
!
!
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (6), slide the desired weights
onto the weight tube.
WARNING:
Do not place more
than 70 lbs. (32 kg) on the Leg Lever (6).
Weight
Tube
Weight
