manualshive.com logo in svg

Leader LT 450, Инструкция по эксплуатации, Страница: 97 / 158

Поделиться
Скачать
Leader LT 450 Скачать руководство пользователя страница 97

8. CONFIGURATION 

87

 

8.13 

Configuring the Pattern Change 

You can configure the pattern change in the PATTERN CHANGE configuration screen. 

 

●

 Procedure 

 

Figure 8-40    Pattern change settings 

 

8.13.1 

Turning Pattern Change On and Off 

You can turn the pattern change function on and off in the PATTERN CHANGE menu screen. 
If you set it to on, the LT 450 will switch between the patterns marked as Yes in Table 12-2, 
“List of output patterns” at approximately 2-second intervals, in the current output format. 
Patterns marked as No or NA will be skipped. 
The menu screen closes when you set the pattern change function to on. If you turn off the 
LT 450 or press any front panel key while the pattern change function is in progress, the 
function will be turned off. 
Use the jog dial and 

△

 and 

▽

 keys to turn the pattern change function on and off. 

 

●

 Settings 

PATTERN CHG 

OFF / ON 

Содержание LT 450































































































































































Отзывы:

Нет отзывов