5. OUTPUT FORMAT
23
5.2
Setting the Sync Signal
When the output format is component, you can press SYNC to select whether or not to add a
sync signal. A sync signal is added to all components, R, G, and B (Y, P
B
, and P
R
) when the
output format is HDTV and only to the G (Y) component when the output format is SDTV or PC
monitor.
You can carry out this procedure when the SYNC indicator is illuminated. If it is not illuminated,
pressing the key produces no effect.
Figure 5-3 SYNC key
5.3
Selecting the Signal Format (COMPONENT)
When the output format is component, you can press COMPONENT to set the component
signal format to RGB or YP
B
P
R.
The signal format is fixed to RGB when the output format is a
PC monitor format (excluding VGA). Also, the signal format is fixed to YP
B
P
R
when the output
pattern is xvYCC.
You can carry out this procedure when the word COMPONENT is illuminated. If it is not
illuminated, pressing the key produces no effect.
Figure 5-4 COMPONENT key