8. CONFIGURATION
67
8.6.2
Recalling Panel Settings
Pressing RECALL will cause its LED to illuminate, and the recall screen to appear.*
1
Use the
jog dial or
and
keys to recall panel settings that have been stored according to the
procedures given in section 8.7.1, “Saving the Panel Settings.”*
2
You can also press (BEGIN) to recall the panel settings at the BEGIN address that has
been specified according to the procedures given in section 8.6.1, “Specifying the Recall
Range.”
To exit from the recall screen, press RECALL again. The LED will turn off, and the recall
screen will close.
The address number you specify here is not stored to preset memories.
*1 The panel settings at the BEGIN address are recalled when you press RECALL. Be careful, because all
the previous settings will be lost.
*2 The address numbers that you can recall are those between and including the beginning and ending
addresses.
●
Settings
RECALL ADRS
0 to 99
Specifies the address number to recall from the panel settings.
●
Procedure
Figure 8-22 Recalling settings