manualshive.com logo in svg

Leader LT 450, Инструкция по эксплуатации, Страница: 85 / 158

Поделиться
Скачать
Leader LT 450 Скачать руководство пользователя страница 85

8. CONFIGURATION 

75

 

HDCP 

OK / NG / DISABLE 
OK: 

Appears when the device connected to the LT 450 
supports HDCP. 

NG: 

Appears when the device connected to the LT 450 
does not support HDCP. 

DISABLE:  Appears when HDCP is set to OFF using the 

procedure described in section 8.8.2, “Configuring the 
HDMI Output.” 

CEC 

OK / NG / DISABLE 
OK: 

Appears when the device connected to the LT 450 
supports CEC. 

NG: 

Appears when the device connected to the LT 450 
does not support CEC. 

DISABLE:  Appears when CEC is set to OFF using the 

procedure described in section 8.8.2, “Configuring the 
HDMI Output.” 

EDID BASIC 

EDID: Extended display identification data 

EDID EXTEND 

If you select EDID BASIC or EDID EXTEND and press ENTER, 
the EDID of the device connected to the LT 450 will be displayed. 
You can scroll through the information by pressing 

  and 

  to 

move the arrow. If DDC is set to OFF in section 8.8.2, 
“Configuring the HDMI Output,” the ENTER key will be disabled 
and the EDID that was retrieved previously will appear. 
To exit from the EDID display screen, press MENU. 

 

●

 Procedure 

 MENU  

→

 HDMI 

→

 HDMI INFORMATION 

 

 

Figure 8-29    HDMI information display 

 

* 

The actual screen displays up to four lines. 

Содержание LT 450































































































































































Отзывы:

Нет отзывов