manualshive.com logo in svg

Leader LT 450, Инструкция по эксплуатации, Страница: 9 / 158

Поделиться
Скачать
Leader LT 450 Скачать руководство пользователя страница 9

IV 

GENERAL SAFETY SUMMARY 

 

 

 

 

■

  Caution on Input/Output Terminals 

Input terminals are rated with a maximum input. Do not supply an input over the specified rating 
in the standard section of the instruction manual. Also, do not supply external power to Output 
terminal, this could cause the instrument to malfunction. 

■

  Caution When Not Using the Instrument For a Long Time 

Make sure to disconnect the power cord from the socket when you do not use the instrument for 
a long time. 

■

  Caution on Connection of the Instrument and a Display 

While the instrument is being connected with a ground terminal of the display, connect or 
disconnect the signal cable. 
By connecting the ground of the display with the instrument, the output part of the instrument 
becomes difficult to break easily. 
Be careful especially, when you connect the display under development. 

 

Connect the ground by the following method. 

・

The ground terminal of the instrument connects with the ground of the display.   

・

Ground the instrument through the power cord, and ground the display. 

Содержание LT 450































































































































































Отзывы:

Нет отзывов