WSE EVAPORATOR MANUAL
WSE Operations Manual
Year: 2018
PAGE: 16
The following are dimensions for the parts labeled above. Always “dry fit” the parts prior to cementing to ensure proper
fit.
Print ID Length
Width
Notes
B1
13.375"
8.5"
B2
8.75"
8.5"
Install The Grates
Place three of the arch grates evenly spaced into the arch with the
grates touching the front of the arch. Place the grates so one is on
each side of the arch and the other is approximately in the middle.
Obtain a piece of “C flute” cardboard (most common type of
cardboard) approximately 20” x 18”. Fold it into thirds along the
length and tape with a non-plastic tape (ex. masking tape). Place it
behind the grates toward the rear of the arch. The cardboard will
provide the spacing needed to remove the grates after the bricks
have been fit in place.
PROPER ORIENTATION OF GRATES
Grates should be installed so the
“V” groove is up. In other words
the opening of the “V” will be in a
position to catch and fill with
ashes
.
